I was researching about how to catch errors in javascript. I faced a problem. due to the way javascript works for a try block to catch an error it has to be within the context of execution which means in the following code:
try { function f(){ throw new Error() } } catch (e) {}
calling f(); the error will not be caught in the try block. essentially what this means is that if we need to catch the errors using try and catch blocks we need to wrap the inside of every function with a try block. I am not sure how feasible is this idea but it I am sure it would reduce code readability.
The other option is using window.onerror which allows you to hook a function that gets executed whenever an uncaught exception occurs. This is obviously much simpler and less invasive and has an upside that errors in any context anywhere will still be reported to the hooked function. But there is a catch. which is that window.onerror does not provide a stacktrace because it is executed in a different context from the error itself. what it has access to is the line number, file name and exception message.
so my question is which method should I use, the surrounding all functions by try blocks or using the window.onerror callback method? how important is the stacktrace?
On 06/12/2013 07:50 AM, Mohamed Ashraf wrote:
I was researching about how to catch errors in javascript. I faced a problem. due to the way javascript works for a try block to catch an error it has to be within the context of execution which means in the following code:
try { function f(){ throw new Error() } } catch (e) {}
calling f(); the error will not be caught in the try block. essentially what this means is that if we need to catch the errors using try and catch blocks we need to wrap the inside of every function with a try block. I am not sure how feasible is this idea but it I am sure it would reduce code readability.
The other option is using window.onerror which allows you to hook a function that gets executed whenever an uncaught exception occurs. This is obviously much simpler and less invasive and has an upside that errors in any context anywhere will still be reported to the hooked function. But there is a catch. which is that window.onerror does not provide a stacktrace because it is executed in a different context from the error itself. what it has access to is the line number, file name and exception message.
so my question is which method should I use, the surrounding all functions by try blocks or using the window.onerror callback method? how important is the stacktrace?
Some of my thoughts are:
* Try/catch has a performance penalty * We need to be able to easily turn off the error reporting feature * Some/most function names in the stack trace are going to be useless as the production js code is minified. * The line numbers in the file will not be of much help either, I guess, unless we change the way that the files are minified (like forcing line breaks every few hundred characters). * If we do want the stack traces, given that we use jQuery, we could tap into it and whip up our own traces. For example (completely untested code):
var lastException; (function ($) { var bind = $.fn.bind; $.fn.bind = function () { try { throw new Error; } catch (exception) { lastException = exception; } bind.apply({}, arguments); }; })(jQuery);
Later, lastException can be accessed from window.onerror. Of course, we'd have to tap into quite a few functions.
To me it sounds like window.onerror is the winner here.
Bye, Rouslan
I am not sure I understand what does last exception now contain that would be of use to us
On 06/12/2013 02:11 PM, Mohamed Ashraf wrote:
I am not sure I understand what does last exception now contain that would be of use to us
It would contain a partial stack trace. But now that I think about it, you're right, it's the useless half of the trace.
BTW, please note that we use bottom posting on this mailing list [0].
Bye, Rouslan
[0]: https://en.wikipedia.org/wiki/Posting_style#Bottom-posting
On Wednesday, June 12, 2013 at 4:07 PM, Rouslan Placella wrote
It would contain a partial stack trace. But now that I think about it, you're right, it's the useless half of the trace.
So as you have pointed out most of the information we recieve from a normal stacktrace would be useless since the javascript files are uglified. What do you suggest we need to do.
BTW, please note that we use bottom posting on this mailing list [0].
Sorry I forgot.
On 06/12/2013 04:15 PM, Mohamed Ashraf wrote:
On Wednesday, June 12, 2013 at 4:07 PM, Rouslan Placella wrote
It would contain a partial stack trace. But now that I think about it, you're right, it's the useless half of the trace.
So as you have pointed out most of the information we recieve from a normal stacktrace would be useless since the javascript files are uglified. What do you suggest we need to do.
You might want to look into source maps[0], I'm not sure how ready that technology is though...
BTW, please note that we use bottom posting on this mailing list [0].
Sorry I forgot.
[0]: http://www.html5rocks.com/en/tutorials/developertools/sourcemaps/
On Thu, Jun 13, 2013 at 6:53 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/12/2013 04:15 PM, Mohamed Ashraf wrote:
On Wednesday, June 12, 2013 at 4:07 PM, Rouslan Placella wrote
It would contain a partial stack trace. But now that I think about it, you're right, it's the useless half of the trace.
So as you have pointed out most of the information we recieve from a normal stacktrace would be useless since the javascript files are uglified. What do you suggest we need to do.
You might want to look into source maps[0], I'm not sure how ready that technology is though...
Is the js minified by us in production releases or do you assume the deployer will do it himself.
BTW, please note that we use bottom posting on this mailing list [0].
Sorry I forgot.
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
2013/6/14 Mohamed Ashraf mohamed.ashraf.213@gmail.com:
On Thu, Jun 13, 2013 at 6:53 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/12/2013 04:15 PM, Mohamed Ashraf wrote:
On Wednesday, June 12, 2013 at 4:07 PM, Rouslan Placella wrote
It would contain a partial stack trace. But now that I think about it, you're right, it's the useless half of the trace.
So as you have pointed out most of the information we recieve from a normal stacktrace would be useless since the javascript files are uglified. What do you suggest we need to do.
You might want to look into source maps[0], I'm not sure how ready that technology is though...
Is the js minified by us in production releases or do you assume the deployer will do it himself.
The JS is minified in the release script.
-- Kind regards,
Dieter Adriaenssens
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
- We need to be able to easily turn off the error reporting feature
You can do it simply by setting a config option I have already set it up in the Header.class.php
- Some/most function names in the stack trace are going to be useless as
the production js code is minified.
- The line numbers in the file will not be of much help either, I guess,
unless we change the way that the files are minified (like forcing line breaks every few hundred characters).
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
- We need to be able to easily turn off the error reporting feature
You can do it simply by setting a config option I have already set it up in the Header.class.php
- Some/most function names in the stack trace are going to be useless as
the production js code is minified.
- The line numbers in the file will not be of much help either, I guess,
unless we change the way that the files are minified (like forcing line breaks every few hundred characters).
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
- We need to be able to easily turn off the error reporting feature
You can do it simply by setting a config option I have already set it up in the Header.class.php
- Some/most function names in the stack trace are going to be useless as
the production js code is minified.
- The line numbers in the file will not be of much help either, I guess,
unless we change the way that the files are minified (like forcing line breaks every few hundred characters).
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
- We need to be able to easily turn off the error reporting feature
You can do it simply by setting a config option I have already set it up in the Header.class.php
- Some/most function names in the stack trace are going to be useless as
the production js code is minified.
- The line numbers in the file will not be of much help either, I guess,
unless we change the way that the files are minified (like forcing line breaks every few hundred characters).
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
- We need to be able to easily turn off the error reporting feature
You can do it simply by setting a config option I have already set it up in the Header.class.php
- Some/most function names in the stack trace are going to be useless as
the production js code is minified.
- The line numbers in the file will not be of much help either, I guess,
unless we change the way that the files are minified (like forcing line breaks every few hundred characters).
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
On 06/22/2013 11:10 AM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
- We need to be able to easily turn off the error reporting feature
You can do it simply by setting a config option I have already set it up in the Header.class.php
- Some/most function names in the stack trace are going to be useless as
the production js code is minified.
- The line numbers in the file will not be of much help either, I guess,
unless we change the way that the files are minified (like forcing line breaks every few hundred characters).
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
Thank you for the explanation, it makes perfect sense. By the way, in the above code snippet, to retain the correct context, it should be:
temp.apply(this, arguments);
Also, out of curiosity, would it be possible to use such a solution for the event handlers that we register with AJAX.registerOnload? What about jquery event handlers (e.g: $('#foo').click(somefunction) ) and jquery ajax callbacks?
Bye, Rouslan
On Sat, Jun 22, 2013 at 5:30 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 11:10 AM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
> Some of my thoughts are: > > * Try/catch has a performance penalty it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
> * We need to be able to easily turn off the error reporting feature You can do it simply by setting a config option I have already set it up in the Header.class.php > * Some/most function names in the stack trace are going to be useless as > the production js code is minified. > * The line numbers in the file will not be of much help either, I guess, > unless we change the way that the files are minified (like forcing line > breaks every few hundred characters). since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
Thank you for the explanation, it makes perfect sense. By the way, in the above code snippet, to retain the correct context, it should be:
temp.apply(this, arguments);
Ah yes you are correct. I was thinking about how will I get the context and just assumed window. but you are correct "this" will refer to the correct context. there is a problem with this approach since these functions are only a small subset of the global functions used by phpmyadmin.
Also, out of curiosity, would it be possible to use such a solution for the event handlers that we register with AJAX.registerOnload? What about jquery event handlers (e.g: $('#foo').click(somefunction) ) and jquery ajax callbacks?
sadly no since they are anonymous functions mostly and I do not have access to them unless I manually insert a try and catch in the code itself
also keep in mind this is just to get the most out of the error and as much as we do will still have exceptions that are thrown in parts of code that are not surrounded by try and catch statements and that is ok since there is a second line of defense with the "window.onerror". I am just trying to catch most errors without changing alot of the codebase and anything not caught we will still get an error report but just without a stacktrace. Also you should keep in mind that a stacktrace is not available in some browsers so even try and catch may not do any better than window.error
Bye, Rouslan
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
On 06/22/2013 05:53 PM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 5:30 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 11:10 AM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote: > On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella > rouslan@placella.com wrote: > >> Some of my thoughts are: >> >> * Try/catch has a performance penalty > it is not too big as can be seen here > http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
>> * We need to be able to easily turn off the error reporting feature > You can do it simply by setting a config option I have already set it > up in the Header.class.php >> * Some/most function names in the stack trace are going to be useless as >> the production js code is minified. >> * The line numbers in the file will not be of much help either, I guess, >> unless we change the way that the files are minified (like forcing line >> breaks every few hundred characters). > since uglified js provides little to no information about the location > of the error. what should we do. I checked up on source maps however > the browser support is not enough. so what do you think should happen. > I think the only way to go is to add try and catch to all the > different functions if you need to find out where the error has > occured. however adding try and catch statements to the entire > codebase will decrease code readability considerably.
Thank you for the explanation, it makes perfect sense. By the way, in the above code snippet, to retain the correct context, it should be:
temp.apply(this, arguments);
Ah yes you are correct. I was thinking about how will I get the context and just assumed window. but you are correct "this" will refer to the correct context. there is a problem with this approach since these functions are only a small subset of the global functions used by phpmyadmin.
Also, out of curiosity, would it be possible to use such a solution for the event handlers that we register with AJAX.registerOnload? What about jquery event handlers (e.g: $('#foo').click(somefunction) ) and jquery ajax callbacks?
sadly no since they are anonymous functions mostly and I do not have access to them unless I manually insert a try and catch in the code itself
Well, you can hook into AJAX.registerOnload, using your code snippet above. There you can reference the callback as "func". I just tested this and it works.
also keep in mind this is just to get the most out of the error and as much as we do will still have exceptions that are thrown in parts of code that are not surrounded by try and catch statements and that is ok since there is a second line of defense with the "window.onerror". I am just trying to catch most errors without changing alot of the codebase and anything not caught we will still get an error report but just without a stacktrace. Also you should keep in mind that a stacktrace is not available in some browsers so even try and catch may not do any better than window.error
I have a few thoughts on the matter.
First of all, it may be useful to do a bit of feature detection. You could deliberately throw an error and catch if, then check if the stack trace is available inside it. Then, based on the result of this test you could decide to wrap the code in a try/catch using your code snippet, if the stack trace will be available, and if the stack trace will not be available there would be no point in trying to catch the error that way and you could leave the functions unwrapped to improve performance.
Another issue that I found is that, in my tests, the stack traces appear to be very cluttered as the JS files are concatenated by the server. Not sure what we could do about this (keep track of number of lines offset for each source file? something else?)...
Bye, Rouslan
On Sat, Jun 22, 2013 at 8:26 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 05:53 PM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 5:30 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 11:10 AM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote: > On 06/16/2013 12:59 PM, Mohamed Ashraf wrote: >> On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella >> rouslan@placella.com wrote: >> >>> Some of my thoughts are: >>> >>> * Try/catch has a performance penalty >> it is not too big as can be seen here >> http://jsperf.com/try-catch-performance-overhead > > Really? On some browsers it's about 20 times slower on the very > benchmark that you are linking to! Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
>>> * We need to be able to easily turn off the error reporting feature >> You can do it simply by setting a config option I have already set it >> up in the Header.class.php >>> * Some/most function names in the stack trace are going to be useless as >>> the production js code is minified. >>> * The line numbers in the file will not be of much help either, I guess, >>> unless we change the way that the files are minified (like forcing line >>> breaks every few hundred characters). >> since uglified js provides little to no information about the location >> of the error. what should we do. I checked up on source maps however >> the browser support is not enough. so what do you think should happen. >> I think the only way to go is to add try and catch to all the >> different functions if you need to find out where the error has >> occured. however adding try and catch statements to the entire >> codebase will decrease code readability considerably.
Thank you for the explanation, it makes perfect sense. By the way, in the above code snippet, to retain the correct context, it should be:
temp.apply(this, arguments);
Ah yes you are correct. I was thinking about how will I get the context and just assumed window. but you are correct "this" will refer to the correct context. there is a problem with this approach since these functions are only a small subset of the global functions used by phpmyadmin.
Also, out of curiosity, would it be possible to use such a solution for the event handlers that we register with AJAX.registerOnload? What about jquery event handlers (e.g: $('#foo').click(somefunction) ) and jquery ajax callbacks?
sadly no since they are anonymous functions mostly and I do not have access to them unless I manually insert a try and catch in the code itself
Well, you can hook into AJAX.registerOnload, using your code snippet above. There you can reference the callback as "func". I just tested this and it works.
also keep in mind this is just to get the most out of the error and as much as we do will still have exceptions that are thrown in parts of code that are not surrounded by try and catch statements and that is ok since there is a second line of defense with the "window.onerror". I am just trying to catch most errors without changing alot of the codebase and anything not caught we will still get an error report but just without a stacktrace. Also you should keep in mind that a stacktrace is not available in some browsers so even try and catch may not do any better than window.error
I have a few thoughts on the matter.
First of all, it may be useful to do a bit of feature detection. You could deliberately throw an error and catch if, then check if the stack trace is available inside it. Then, based on the result of this test you could decide to wrap the code in a try/catch using your code snippet, if the stack trace will be available, and if the stack trace will not be available there would be no point in trying to catch the error that way and you could leave the functions unwrapped to improve performance.
yes I will install many different browsers and try to test it on a browser without a stacktrace
Another issue that I found is that, in my tests, the stack traces appear to be very cluttered as the JS files are concatenated by the server.
can you give me an example of what you mean.
Not sure what we could do about this (keep track of number of lines offset for each source file? something else?)...
yes this is a problem which I have thought about but have not yet figured out the solution. At first I just thought the developers can figure it out since they get the url and the phpmyadmin version so they can simulate the situation and see where a specific line is, however it turns out its not so easy at all. then I thought my webserver can do it for them and extract that part of the code and show it with the report but then I will have to interface with git from the web server and get the actual commit from whatever info that I have which would not have been easy. The thing that comes to mind now but I am still looking for a better solution is putting line markers in the generated js file. for example between each file I can output a js comment showing the current line number allowing the developer to narrow down his search but this is far from optimal and would appreciate any ideas
Bye, Rouslan
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
On Sat, Jun 22, 2013 at 8:26 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 05:53 PM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 5:30 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 11:10 AM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote: > On 06/16/2013 12:59 PM, Mohamed Ashraf wrote: >> On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella >> rouslan@placella.com wrote: >> >>> Some of my thoughts are: >>> >>> * Try/catch has a performance penalty >> it is not too big as can be seen here >> http://jsperf.com/try-catch-performance-overhead > > Really? On some browsers it's about 20 times slower on the very > benchmark that you are linking to! Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
>>> * We need to be able to easily turn off the error reporting feature >> You can do it simply by setting a config option I have already set it >> up in the Header.class.php >>> * Some/most function names in the stack trace are going to be useless as >>> the production js code is minified. >>> * The line numbers in the file will not be of much help either, I guess, >>> unless we change the way that the files are minified (like forcing line >>> breaks every few hundred characters). >> since uglified js provides little to no information about the location >> of the error. what should we do. I checked up on source maps however >> the browser support is not enough. so what do you think should happen. >> I think the only way to go is to add try and catch to all the >> different functions if you need to find out where the error has >> occured. however adding try and catch statements to the entire >> codebase will decrease code readability considerably.
Thank you for the explanation, it makes perfect sense. By the way, in the above code snippet, to retain the correct context, it should be:
temp.apply(this, arguments);
Ah yes you are correct. I was thinking about how will I get the context and just assumed window. but you are correct "this" will refer to the correct context. there is a problem with this approach since these functions are only a small subset of the global functions used by phpmyadmin.
Also, out of curiosity, would it be possible to use such a solution for the event handlers that we register with AJAX.registerOnload? What about jquery event handlers (e.g: $('#foo').click(somefunction) ) and jquery ajax callbacks?
sadly no since they are anonymous functions mostly and I do not have access to them unless I manually insert a try and catch in the code itself
Well, you can hook into AJAX.registerOnload, using your code snippet above. There you can reference the callback as "func". I just tested this and it works.
also keep in mind this is just to get the most out of the error and as much as we do will still have exceptions that are thrown in parts of code that are not surrounded by try and catch statements and that is ok since there is a second line of defense with the "window.onerror". I am just trying to catch most errors without changing alot of the codebase and anything not caught we will still get an error report but just without a stacktrace. Also you should keep in mind that a stacktrace is not available in some browsers so even try and catch may not do any better than window.error
I have a few thoughts on the matter.
First of all, it may be useful to do a bit of feature detection. You could deliberately throw an error and catch if, then check if the stack trace is available inside it. Then, based on the result of this test you could decide to wrap the code in a try/catch using your code snippet, if the stack trace will be available, and if the stack trace will not be available there would be no point in trying to catch the error that way and you could leave the functions unwrapped to improve performance.
yes I will install many different browsers and try to test it on a browser without a stacktrace
Another issue that I found is that, in my tests, the stack traces appear to be very cluttered as the JS files are concatenated by the server.
can you give me an example of what you mean.
Not sure what we could do about this (keep track of number of lines offset for each source file? something else?)...
yes this is a problem which I have thought about but have not yet figured out the solution. At first I just thought the developers can figure it out since they get the url and the phpmyadmin version so they can simulate the situation and see where a specific line is, however it turns out its not so easy at all. then I thought my webserver can do it for them and extract that part of the code and show it with the report but then I will have to interface with git from the web server and get the actual commit from whatever info that I have which would not have been easy. The thing that comes to mind now but I am still looking for a better solution is putting line markers in the generated js file. for example between each file I can output a js comment showing the current line number allowing the developer to narrow down his search but this is far from optimal and would appreciate any ideas
Bye, Rouslan
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
On 06/22/2013 10:00 PM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 8:26 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 05:53 PM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 5:30 PM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 11:10 AM, Mohamed Ashraf wrote:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote: > On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote: >> On 06/16/2013 12:59 PM, Mohamed Ashraf wrote: >>> On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella >>> rouslan@placella.com wrote: >>> >>>> Some of my thoughts are: >>>> >>>> * Try/catch has a performance penalty >>> it is not too big as can be seen here >>> http://jsperf.com/try-catch-performance-overhead >> >> Really? On some browsers it's about 20 times slower on the very >> benchmark that you are linking to! > Really!! That is strange I tested it multiple times and everytime it > showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
>>>> * We need to be able to easily turn off the error reporting feature >>> You can do it simply by setting a config option I have already set it >>> up in the Header.class.php >>>> * Some/most function names in the stack trace are going to be useless as >>>> the production js code is minified. >>>> * The line numbers in the file will not be of much help either, I guess, >>>> unless we change the way that the files are minified (like forcing line >>>> breaks every few hundred characters). >>> since uglified js provides little to no information about the location >>> of the error. what should we do. I checked up on source maps however >>> the browser support is not enough. so what do you think should happen. >>> I think the only way to go is to add try and catch to all the >>> different functions if you need to find out where the error has >>> occured. however adding try and catch statements to the entire >>> codebase will decrease code readability considerably.
Thank you for the explanation, it makes perfect sense. By the way, in the above code snippet, to retain the correct context, it should be:
temp.apply(this, arguments);
Ah yes you are correct. I was thinking about how will I get the context and just assumed window. but you are correct "this" will refer to the correct context. there is a problem with this approach since these functions are only a small subset of the global functions used by phpmyadmin.
Also, out of curiosity, would it be possible to use such a solution for the event handlers that we register with AJAX.registerOnload? What about jquery event handlers (e.g: $('#foo').click(somefunction) ) and jquery ajax callbacks?
sadly no since they are anonymous functions mostly and I do not have access to them unless I manually insert a try and catch in the code itself
Well, you can hook into AJAX.registerOnload, using your code snippet above. There you can reference the callback as "func". I just tested this and it works.
also keep in mind this is just to get the most out of the error and as much as we do will still have exceptions that are thrown in parts of code that are not surrounded by try and catch statements and that is ok since there is a second line of defense with the "window.onerror". I am just trying to catch most errors without changing alot of the codebase and anything not caught we will still get an error report but just without a stacktrace. Also you should keep in mind that a stacktrace is not available in some browsers so even try and catch may not do any better than window.error
I have a few thoughts on the matter.
First of all, it may be useful to do a bit of feature detection. You could deliberately throw an error and catch if, then check if the stack trace is available inside it. Then, based on the result of this test you could decide to wrap the code in a try/catch using your code snippet, if the stack trace will be available, and if the stack trace will not be available there would be no point in trying to catch the error that way and you could leave the functions unwrapped to improve performance.
yes I will install many different browsers and try to test it on a browser without a stacktrace
Another issue that I found is that, in my tests, the stack traces appear to be very cluttered as the JS files are concatenated by the server.
can you give me an example of what you mean.
I attached a stack trace that I got in firefox, in chrome it looks a little bit more useful, but not by much.
Not sure what we could do about this (keep track of number of lines offset for each source file? something else?)...
yes this is a problem which I have thought about but have not yet figured out the solution. At first I just thought the developers can figure it out since they get the url and the phpmyadmin version so they can simulate the situation and see where a specific line is, however it turns out its not so easy at all. then I thought my webserver can do it for them and extract that part of the code and show it with the report but then I will have to interface with git from the web server and get the actual commit from whatever info that I have which would not have been easy. The thing that comes to mind now but I am still looking for a better solution is putting line markers in the generated js file. for example between each file I can output a js comment showing the current line number allowing the developer to narrow down his search but this is far from optimal and would appreciate any ideas
Line markers are not going to accomplish anything here. To solve this issue you'd need to create a "stack trace translator" of some sort. There are a few ways that this could be done. The first thing that springs to my mind is to send the stack trace back to the server, where the translation would happen. So, if you have something like this:
@http://localhost/pma/js/get_scripts.js.php?scripts%5B%5D=jquery/jquery-1.8.3...
It would get translated into, for example:
@functions.js:123
It shouldn't be too difficult, on the server you would have to load the necessary js files into memory (in exactly the same way that get_scripts.js.php does) one by one and keep track of how many lines you loaded so far. As soon as you go over the required line number (591, in this case) you will know which file that line came from. Then you'd only have to do some simple maths to figure out which line in that file we are interested in. After the translation is done, you could just send the new and improved stack trace back to the browser for error report submission.
Keep in mind that different browsers seem to generate the traces in different formats, so the solution would have to be quite flexible. The original trace might be included in case the translation didn't work out...
Hope this helps.
Bye, Rouslan
2013/6/22 Mohamed Ashraf mohamed.ashraf.213@gmail.com:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
Just wondering, if you add try-catch phrases to the current PMA_* functions, I guess they should be added to future PMA_* functions as well?
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
- We need to be able to easily turn off the error reporting feature
You can do it simply by setting a config option I have already set it up in the Header.class.php
- Some/most function names in the stack trace are going to be useless as
the production js code is minified.
- The line numbers in the file will not be of much help either, I guess,
unless we change the way that the files are minified (like forcing line breaks every few hundred characters).
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
-- Kind regards,
Dieter Adriaenssens
On Monday, June 24, 2013 at 4:19 PM, Dieter Adriaenssens wrote:
2013/6/22 Mohamed Ashraf mohamed.ashraf.213@gmail.com:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
> Some of my thoughts are: > > * Try/catch has a performance penalty it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
Just wondering, if you add try-catch phrases to the current PMA_* functions, I guess they should be added to future PMA_* functions as well?
I am using javascript to wrap the code around at runtime. Any new function would be wrapped automatically if I do my job right
the javascript in phpmyadmin is just for aesthetics and caching but it is not really very processor intensive anyway it is mostly about doing things to the page and sending requests to the server and most of the heavy lifting is done by jquery itself which I shall not change. The benchmark is to show what happens in the extreme case which may be problematic in node.js where the js code does heavy lifting and performance hits are problematic. however for the simple javascript we have, the negligible loss in performance cannot be perceived by the end users. but the stack traces we get could significantly better their experience in the long run.
I will be using an automated function to add the try and catch at runtime so that there would be minimum modification to the codebase and it can be easily removed if required.
> * We need to be able to easily turn off the error reporting feature You can do it simply by setting a config option I have already set it up in the Header.class.php > * Some/most function names in the stack trace are going to be useless as > the production js code is minified. > * The line numbers in the file will not be of much help either, I guess, > unless we change the way that the files are minified (like forcing line > breaks every few hundred characters). >
since uglified js provides little to no information about the location of the error. what should we do. I checked up on source maps however the browser support is not enough. so what do you think should happen. I think the only way to go is to add try and catch to all the different functions if you need to find out where the error has occured. however adding try and catch statements to the entire codebase will decrease code readability considerably.
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
-- Kind regards,
Dieter Adriaenssens
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Phpmyadmin-devel mailing list Phpmyadmin-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/phpmyadmin-devel
2013/6/24 Mohamed Ashraf mohamed.ashraf.213@gmail.com:
On Monday, June 24, 2013 at 4:19 PM, Dieter Adriaenssens wrote:
2013/6/22 Mohamed Ashraf mohamed.ashraf.213@gmail.com:
On Sat, Jun 22, 2013 at 10:27 AM, Rouslan Placella rouslan@placella.com wrote:
On 06/22/2013 01:21 AM, Mohamed Ashraf wrote:
On Saturday, June 22, 2013 at 12:49 AM, Rouslan Placella wrote:
On 06/16/2013 12:59 PM, Mohamed Ashraf wrote:
On Wed, Jun 12, 2013 at 9:58 AM, Rouslan Placella rouslan@placella.com wrote:
Some of my thoughts are:
- Try/catch has a performance penalty
it is not too big as can be seen here http://jsperf.com/try-catch-performance-overhead
Really? On some browsers it's about 20 times slower on the very benchmark that you are linking to!
Really!! That is strange I tested it multiple times and everytime it showed they are all equal in time. Which test case was 20 times slower?
Opera 11 would be one of them. IE 10 is also quite bad, but by a lower magnitude...
the reduction in performance is usually in wrapping the inside of a function with try and catch. I was thinking of doing the other way and wrapping the functions from outside like this
var temp = PMA_foo PMA_foo = function() { try{ temp.apply(window, arguments); } catch(e) { my_method(e); } }
I am thinking of doing this to all global functions starting with PMA_ and according to the benchmark this should have an equivalent performance to the no try catch performance. also if we don't do anything of the sort then we would never get a stacktrace.
Just wondering, if you add try-catch phrases to the current PMA_* functions, I guess they should be added to future PMA_* functions as well?
I am using javascript to wrap the code around at runtime. Any new function would be wrapped automatically if I do my job right
Sounds good! -- Kind regards,
Dieter Adriaenssens
-
Dieter Adriaenssens -
Mohamed Ashraf -
Rouslan Placella