Hi all, I am trying to set up the error reporting server on xampp by following the steps in the how to deploy section of the readme of error-reporting server repo https://github.com/phpmyadmin/error-reporting-server/
The second and third step say
Add a virtual hosts entry pointing at the directory where you extracted the files in the previous step. Make sure that the installation is in the document root. and Configure the web server
I've added the virtual host entry point in the httpd.conf file and enabled vhosts.conf.
I've only been able to do this step properly, after this step, opening localhost opens the error reporting server and i'm unable to visit anything else.
The fourth step says create the database for the server
It doesn't tell the info of the database, what to create??
The last step says Run the migrations that have been created so far to setup the database For new system: just run migration sudo bin/cake migrations migrate Running the command gives the following error
Exception: There was a problem connecting to the database: SQLSTATE[HY000] [2002] No such file or directory in [/opt/lampp/htdocs/gsoc/error-reporting-server/vendor/robmorgan/phinx/src/Phinx/Db/Adapter/MysqlAdapter.php, line 115] Followed by many other errors.
Next section is oauth setup config. what should be the developors callback? the whole path? http://localhost/error-reportong-server/developrs/callback ??
Next is setting up the webhook- I don't understand anything in this section. The target repo is the phpmadmin/phpmyadmin repo, how can I add a webhook in that repo??
Kindly help Thanks Lakshay arora
Hello,
I only have partial answers; please see below. Also see https://github.com/phpmyadmin/error-reporting-server/pull/179
On Sat, Mar 3, 2018 at 4:46 AM, Lakshay arora arora.lakshya123@gmail.com wrote:
Hi all, I am trying to set up the error reporting server on xampp by following the steps in the how to deploy section of the readme of error-reporting server repo https://github.com/phpmyadmin/error-reporting-server/
The second and third step say
Add a virtual hosts entry pointing at the directory where you extracted the files in the previous step. Make sure that the installation is in the document root. and Configure the web server
I've added the virtual host entry point in the httpd.conf file and enabled vhosts.conf.
Yes, the way the current configuration directive is written, it will override any existing services on port 80.
I've modified it a bit for my own installation, so that my "normal" webserver process continues on port 80:
Listen 8080 <VirtualHost *:8080> DocumentRoot "/usr/local/src/error-reporting-server"
<Directory /usr/local/src/error-reporting-server> Require all granted </Directory> </VirtualHost>
Then I can access the error reporting server on port 8080
I've only been able to do this step properly, after this step, opening localhost opens the error reporting server and i'm unable to visit anything else.
The fourth step says create the database for the server
It doesn't tell the info of the database, what to create??
I think this just means to create a blank database, which you then tell the name of to app.php.
One problem I've found is that I have no idea how to generate an OAuth authentication attempt. I'm able to get to a page that has a link to "Login with Github" but the link takes me to /developers/login which doesn't exist, giving a 404 error.
The last step says Run the migrations that have been created so far to setup the database For new system: just run migration sudo bin/cake migrations migrate Running the command gives the following error
Exception: There was a problem connecting to the database: SQLSTATE[HY000] [2002] No such file or directory in [/opt/lampp/htdocs/gsoc/error- reporting-server/vendor/robmorgan/phinx/src/Phinx/Db/Adapter/MysqlAdapter.php, line 115] Followed by many other errors.
Probably you didn't create and/or specify the database name as mentioned above, although I'm not sure.
Next section is oauth setup config. what should be the developors callback? the whole path? http://localhost/error-reportong-server/developrs/callback ??
Next is setting up the webhook- I don't understand anything in this section. The target repo is the phpmadmin/phpmyadmin repo, how can I add a webhook in that repo??
Kindly help Thanks Lakshay arora
Developers mailing list Developers@phpmyadmin.net https://lists.phpmyadmin.net/mailman/listinfo/developers
@isaac thank you for your reply.
On Sun, Mar 4, 2018 at 7:48 AM, Isaac Bennetch bennetch@gmail.com wrote:
Hello,
I only have partial answers; please see below. Also see https://github.com/phpmyadmin/error-reporting-server/pull/179
On Sat, Mar 3, 2018 at 4:46 AM, Lakshay arora arora.lakshya123@gmail.com wrote:
Hi all, I am trying to set up the error reporting server on xampp by following the steps in the how to deploy section of the readme of error-reporting server repo https://github.com/phpmyadmin/error-reporting-server/
The second and third step say
Add a virtual hosts entry pointing at the directory where you extracted the files in the previous step. Make sure that the installation is in the document root. and Configure the web server
I've added the virtual host entry point in the httpd.conf file and enabled vhosts.conf.
Yes, the way the current configuration directive is written, it will override any existing services on port 80.
I've modified it a bit for my own installation, so that my "normal" webserver process continues on port 80:
Listen 8080 <VirtualHost *:8080> DocumentRoot "/usr/local/src/error-reporting-server"
<Directory /usr/local/src/error-reporting-server> Require all granted
</Directory> </VirtualHost>
Then I can access the error reporting server on port 8080
I've only been able to do this step properly, after this step, opening localhost opens the error reporting server and i'm unable to visit anything else.
The fourth step says create the database for the server
It doesn't tell the info of the database, what to create??
I think this just means to create a blank database, which you then tell the name of to app.php.
One problem I've found is that I have no idea how to generate an OAuth authentication attempt. I'm able to get to a page that has a link to "Login with Github" but the link takes me to /developers/login which doesn't exist, giving a 404 error.
The last step says Run the migrations that have been created so far to setup the database For new system: just run migration sudo bin/cake migrations migrate Running the command gives the following error
Exception: There was a problem connecting to the database: SQLSTATE[HY000] [2002] No such file or directory in [/opt/lampp/htdocs/gsoc/error-reporting-server/vendor/robmor gan/phinx/src/Phinx/Db/Adapter/MysqlAdapter.php, line 115] Followed by many other errors.
Probably you didn't create and/or specify the database name as mentioned above, although I'm not sure.
Next section is oauth setup config. what should be the developors callback? the whole path? http://localhost/error-reportong-server/developrs/callback ??
Next is setting up the webhook- I don't understand anything in this section. The target repo is the phpmadmin/phpmyadmin repo, how can I add a webhook in that repo??
Kindly help Thanks Lakshay arora
Developers mailing list Developers@phpmyadmin.net https://lists.phpmyadmin.net/mailman/listinfo/developers
Developers mailing list Developers@phpmyadmin.net https://lists.phpmyadmin.net/mailman/listinfo/developers
I have configured the server and made an oauth application on github, but, logging in requires commit privileges for phpmyadmin repository.
On Sun, Mar 4, 2018 at 11:22 AM, Lakshay arora arora.lakshya123@gmail.com wrote:
@isaac thank you for your reply.
On Sun, Mar 4, 2018 at 7:48 AM, Isaac Bennetch bennetch@gmail.com wrote:
Hello,
I only have partial answers; please see below. Also see https://github.com/phpmyadmin/error-reporting-server/pull/179
On Sat, Mar 3, 2018 at 4:46 AM, Lakshay arora <arora.lakshya123@gmail.com
wrote:
Hi all, I am trying to set up the error reporting server on xampp by following the steps in the how to deploy section of the readme of error-reporting server repo https://github.com/phpmyadmin/error-reporting-server/
The second and third step say
Add a virtual hosts entry pointing at the directory where you extracted the files in the previous step. Make sure that the installation is in the document root. and Configure the web server
I've added the virtual host entry point in the httpd.conf file and enabled vhosts.conf.
Yes, the way the current configuration directive is written, it will override any existing services on port 80.
I've modified it a bit for my own installation, so that my "normal" webserver process continues on port 80:
Listen 8080 <VirtualHost *:8080> DocumentRoot "/usr/local/src/error-reporting-server"
<Directory /usr/local/src/error-reporting-server> Require all granted
</Directory> </VirtualHost>
Then I can access the error reporting server on port 8080
I've only been able to do this step properly, after this step, opening localhost opens the error reporting server and i'm unable to visit anything else.
The fourth step says create the database for the server
It doesn't tell the info of the database, what to create??
I think this just means to create a blank database, which you then tell the name of to app.php.
One problem I've found is that I have no idea how to generate an OAuth authentication attempt. I'm able to get to a page that has a link to "Login with Github" but the link takes me to /developers/login which doesn't exist, giving a 404 error.
The last step says Run the migrations that have been created so far to setup the database For new system: just run migration sudo bin/cake migrations migrate Running the command gives the following error
Exception: There was a problem connecting to the database: SQLSTATE[HY000] [2002] No such file or directory in [/opt/lampp/htdocs/gsoc/error-reporting-server/vendor/robmor gan/phinx/src/Phinx/Db/Adapter/MysqlAdapter.php, line 115] Followed by many other errors.
Probably you didn't create and/or specify the database name as mentioned above, although I'm not sure.
Next section is oauth setup config. what should be the developors callback? the whole path? http://localhost/error-reportong-server/developrs/callback ??
Next is setting up the webhook- I don't understand anything in this section. The target repo is the phpmadmin/phpmyadmin repo, how can I add a webhook in that repo??
Kindly help Thanks Lakshay arora
Developers mailing list Developers@phpmyadmin.net https://lists.phpmyadmin.net/mailman/listinfo/developers
Developers mailing list Developers@phpmyadmin.net https://lists.phpmyadmin.net/mailman/listinfo/developers
-
Isaac Bennetch -
Lakshay arora